FANUC 18i-MB system A02B-0283-B502 operation panel
- Industrial LCD display
-
Industrial Products
- DC Servo Drive
- AC Servo Drive
- other
- Heidelberg
- FANUC
- IFM
- Meter
- CCD
- Membrane Keypad
- Film
- YOKOGAWA Module
- Card
- ABB
- MITSUBISHI
- FANUC
- KEYENCE
- BECKHOFF
- Honeywell
- HOLLYSYS
- FUJI servo drives
- HP
- solenoid valve
- thermostat
- Siemens adapter
- color oscilloscope
- Fujitsu connector
- CHELIC
- SMC
- CISCO Module
- INTEL
- Key board
- FAIRCHILD
- Motherboard
- Board
- Bearing
- other
- Control Panel
- Contactor
- Circuit
- OMRON
- Relay
- Controller
- Photoelectric Switch
- Photoelectric Sensor
- Original
- Fan
- Motor Driver
- Limit Switch
- Amplifier
- power supply
- LENZE
- Cable
- Encoder
- Sensor
- Transformer
- Fiber Optic Sensor
- Protection Relay
- Temperature Controller
- Proximity Switch
- Switch Sensor
- Siemens
- Industrial board
- HMI Touch Glass
-
HMI Full Machine Whole unit
- OMRON HMI Touch Panel
- Siemens HMI Touch Panel
- Mitsubishi HMI Touch Panel
- Allen-Bradley automation HMI Touch Panel
- DELTA HMI Touch Panel
- EVIEW DELTA HMI Touch Panel
- KINCO DELTA HMI Touch Panel
- HITECH HMI Touch Panel
- WEINTECK HMI Touch Panel
- TECVIEW HMI Touch Panel
- WEINVIEW HMI Touch Panel
- PRO-FACE HMI Touch Panel
- SIMATIC HMI Touch Panel
- AMPIRE HMI Touch Panel
- HEIDELBERG HMI Touch Panel
- PANASONIC HMI Touch Panel
- PATLITE HMI Touch Panel
- KYOCERA HMI Touch Panel
- KEYENCE HMI Touch Panel
- WEINVIEW HMI Touch Panel
- HITECH HMI Touch Panel
- FUJI HMI Touch Panel
- HAKKO HMI Touch Panel
- SCHNEIDER HMI Touch Panel
- SAMKOON touch panel
- other
- Module
- lcd inverter
- Membrane Keypad Switch
- Winni Touch Screens
- Frequency Inverter
- Servo Motor
- PLC
Name: A02B-0283-B502.pdfFANUC 18i-MB system A02B-0283-B502 operation panel
Product Overview
A02B-0283-B502 is a 9.0-inch industrial TFT LCD with 400 cd/m² typical brightness and 500:1 contrast ratio, optimized for clear visibility in factory lighting. Viewing angles are 70° horizontal / 60° vertical, matching the original FANUC panel’s optical performance. It uses the FANUC proprietary interface with a dedicated connector, ensuring seamless signal communication with the CNC controller. Operating temperature range is 0°C to +50°C, designed for CNC machine room ambient conditions. The panel includes an integrated LED backlight with 50,000-hour lifespan, eliminating frequent backlight replacement. Physical dimensions and mounting holes are 1:1 identical to the original FANUC display, enabling direct bolt-on installation. Our technical team provides the official FANUC datasheet, connector pinout, and installation manual for A02B-0283-B502, guiding CNC technicians through quick replacement.
Product Applications
A02B-0283-B502 is widely used in:
FANUC Series 0i-M CNC Operator Panels
FANUC Series 0i-T CNC Control Units
FANUC Series 0i-D CNC Machine Displays
CNC Milling & Turning Machine HMI Replacement
Industrial CNC Machine Tool Control Panels
A02B-0283-B502 Product Specifications Table
| Model: | A02B-0283-B502 |
| Brand: | FANUC |
| Size: | 9.0" |
| Pixel Number: | 640 × 480 (VGA) |
| Display Type: | Industrial TFT LCD |
| Contrast Ratio: | 500:1 (Typ.) |
| Luminance: | 400 cd/m² (Typ.) |
| Viewing Angle: | 70° (H) / 60° (V) |
| Interface: | FANUC Proprietary |
| Operating Temperature: | 0°C ~ +50°C |
| Backlight: | LED, 50,000 hours |
| Application: | FANUC 0i CNC Operator Panel |
| Condition: | Genuine FANUC Original New |
FAQ
Q1: Is A02B-0283-B502 genuine FANUC original?
A1: Yes, A02B-0283-B502 is 100% genuine FANUC original new surplus, no copy or refurbished.
Q2: Does it fit FANUC 0i series CNC operator panel?
A2: Yes, A02B-0283-B502 is the exact OEM replacement for FANUC 0i-M/0i-T/0i-D operator panels.
Q3: Is it plug-and-play? Need driver changes?
A3: A02B-0283-B502 is direct plug-and-play, no driver or software modification required.
Q4: Can it run 24/7 in CNC workshop?
A4: Yes, industrial-grade design, anti-vibration, stable for 24/7 CNC operation.
Q5: Do you provide installation support?
A5: Yes, we provide FANUC installation manual and technical guidance for A02B-0283-B502.
Product Image
FANUC 18i-MB system A02B-0283-B502 operation panel
Product Overview
A02B-0283-B502 is a 9.0-inch industrial TFT LCD with 400 cd/m² typical brightness and 500:1 contrast ratio, optimized for clear visibility in factory lighting. Viewing angles are 70° horizontal / 60° vertical, matching the original FANUC panel’s optical performance. It uses the FANUC proprietary interface with a dedicated connector, ensuring seamless signal communication with the CNC controller. Operating temperature range is 0°C to +50°C, designed for CNC machine room ambient conditions. The panel includes an integrated LED backlight with 50,000-hour lifespan, eliminating frequent backlight replacement. Physical dimensions and mounting holes are 1:1 identical to the original FANUC display, enabling direct bolt-on installation. Our technical team provides the official FANUC datasheet, connector pinout, and installation manual for A02B-0283-B502, guiding CNC technicians through quick replacement.
Product Applications
A02B-0283-B502 is widely used in:
FANUC Series 0i-M CNC Operator Panels
FANUC Series 0i-T CNC Control Units
FANUC Series 0i-D CNC Machine Displays
CNC Milling & Turning Machine HMI Replacement
Industrial CNC Machine Tool Control Panels
A02B-0283-B502 Product Specifications Table
| Model: | A02B-0283-B502 |
| Brand: | FANUC |
| Size: | 9.0" |
| Pixel Number: | 640 × 480 (VGA) |
| Display Type: | Industrial TFT LCD |
| Contrast Ratio: | 500:1 (Typ.) |
| Luminance: | 400 cd/m² (Typ.) |
| Viewing Angle: | 70° (H) / 60° (V) |
| Interface: | FANUC Proprietary |
| Operating Temperature: | 0°C ~ +50°C |
| Backlight: | LED, 50,000 hours |
| Application: | FANUC 0i CNC Operator Panel |
| Condition: | Genuine FANUC Original New |
FAQ
Q1: Is A02B-0283-B502 genuine FANUC original?
A1: Yes, A02B-0283-B502 is 100% genuine FANUC original new surplus, no copy or refurbished.
Q2: Does it fit FANUC 0i series CNC operator panel?
A2: Yes, A02B-0283-B502 is the exact OEM replacement for FANUC 0i-M/0i-T/0i-D operator panels.
Q3: Is it plug-and-play? Need driver changes?
A3: A02B-0283-B502 is direct plug-and-play, no driver or software modification required.
Q4: Can it run 24/7 in CNC workshop?
A4: Yes, industrial-grade design, anti-vibration, stable for 24/7 CNC operation.
Q5: Do you provide installation support?
A5: Yes, we provide FANUC installation manual and technical guidance for A02B-0283-B502.
Product Image
04/17/2024, By
04/17/2024, By
04/17/2024, By
04/17/2024, By
04/17/2024, By
04/17/2024, By
04/17/2024, By
04/17/2024, By
04/17/2024, By
04/17/2024, By
