21.3 inch TFT LCD for Industrial HMI - TM213XDGP05-00

The TIANMA TM213XDGP05-00 is a 21.3-inch a-Si TFT-LCD LCM module built for demanding industrial and professional display systems. It delivers a sharp QXGA 1536(RGB)×2048 resolution at 120 PPI on a 324.864 × 433.152 mm active area, with 100% sRGB coverage for accurate, saturated color reproduction. An SFT (Normally Black, Transmissive) display mode, 900 cd/m² brightness, 2000:1 typical contrast ratio and wide 89°/89°/89°/89° viewing angles make it a strong choice for high-information, always-on equipment where legibility and color fidelity are critical. The module is driven through a 4-channel, 10-bit LVDS interface, operates from 24.0 ± 1.2 V, and is rated for 50,000 hours of backlight life.

Features

• 21.3-inch a-Si TFT-LCD LCM with QXGA 1536(RGB)×2048 resolution and 120 PPI pixel density
• SFT (Super Fine TFT) Normally Black, Transmissive display mode for deep blacks and stable image quality
• Brightness of 900 cd/m² with 2000:1 typical contrast ratio (Transmissive)
• Full 89°/89°/89°/89° viewing angles (typical, CR ≥ 10) for consistent readability from multiple directions
• 100% sRGB coverage (CIE 1931) with a 6455K color temperature for color-accurate output
• Fast 35 ms typical response time (Tr + Td), suitable for frequently refreshed operator interfaces and live data
• 4-channel, 10-bit LVDS interface for reliable, high-volume data transfer to embedded systems
• Wide operating temperature range of 0 °C to 60 °C; storage temperature range of -20 °C to 60 °C
• 50,000-hour (typical) backlight lifetime for long service intervals in continuous-duty equipment
• Low typical power consumption of 51.0 W with a 24.0 ± 1.2 V supply requirement
• Compact 10.5 mm typical / 17 mm maximum bezel outline with a 324.864 × 433.152 mm active area
• 60 Hz refresh rate and a module weight of 6 kg

Applications

• Industrial HMI panels, machine control consoles and production-line operator terminals
• Medical imaging and patient monitoring display systems requiring high-resolution, color-accurate panels
• Test & measurement, instrumentation and laboratory equipment front panels
• Diagnostic service tools, analyzers and veterinary/point-of-care equipment displays
• Industrial data acquisition, SCADA and process control monitoring stations
• Professional kiosk and information systems used in controlled indoor environments
• Automated inspection and vision-system operator interfaces
• Digital signage and control-room displays with extended operating temperature requirements

What are the key specifications of the TM213XDGP05-00?

The TIANMA TM213XDGP05-00 is a 21.3-inch a-Si TFT-LCD LCM with 1536(RGB)×2048 QXGA resolution at 120 PPI. It features 900 cd/m² brightness, 2000:1 typical contrast ratio, 89°/89°/89°/89° viewing angles, 100% sRGB coverage (CIE 1931), a 35 ms typical response time and a 60 Hz refresh rate, driven via a 4-channel 10-bit LVDS interface.

What is the active area and physical outline of the module?

The active area measures 324.864 × 433.152 mm, and the panel outline is defined by a 10.5 mm typical / 17 mm maximum bezel dimension. The module weighs 6 kg and operates on a 24.0 ± 1.2 V supply with 51.0 W typical power consumption.

What environmental conditions can the panel operate and be stored in?

The operating temperature range is 0 °C to 60 °C, and the storage temperature range is -20 °C to 60 °C. The panel uses an SFT Normally Black transmissive display mode and includes a backlight rated for 50,000 hours of typical lifetime, supporting continuous-duty industrial use within the specified ranges.

What interface and signal format does the module support?

The TM213XDGP05-00 uses an LVDS interface with 4 channels and 10-bit color depth, providing a stable digital link between the panel and the host controller or video processing board for industrial system integration.

How does color performance compare for design and imaging applications?

The panel offers 100% sRGB coverage (CIE 1931) with a color temperature of 6455K, combined with a 2000:1 typical contrast ratio in transmissive mode. These characteristics suit applications where accurate, consistent color rendering is important, such as medical imaging, inspection systems and professional HMI equipment.

Is this module suitable for embedded systems requiring consistent viewing from off-axis positions?

Yes. Viewing angles are rated at 89°/89°/89°/89° (typical, CR ≥ 10) across all four directions, and the 35 ms typical response time (Tr + Td) provides consistent image quality for frequently changing content in operator-facing industrial interfaces.