4PP420.1505-B5 touch screen glass
- Industrial LCD display
-
Industrial Products
- DC Servo Drive
- AC Servo Drive
- other
- Heidelberg
- FANUC
- IFM
- Meter
- CCD
- Membrane Keypad
- Film
- YOKOGAWA Module
- Card
- ABB
- MITSUBISHI
- FANUC
- KEYENCE
- BECKHOFF
- Honeywell
- HOLLYSYS
- FUJI servo drives
- HP
- solenoid valve
- thermostat
- Siemens adapter
- color oscilloscope
- Fujitsu connector
- CHELIC
- SMC
- CISCO Module
- INTEL
- Key board
- FAIRCHILD
- Motherboard
- Board
- Bearing
- other
- Control Panel
- Contactor
- Circuit
- OMRON
- Relay
- Controller
- Photoelectric Switch
- Photoelectric Sensor
- Original
- Fan
- Motor Driver
- Limit Switch
- Amplifier
- power supply
- LENZE
- Cable
- Encoder
- Sensor
- Transformer
- Fiber Optic Sensor
- Protection Relay
- Temperature Controller
- Proximity Switch
- Switch Sensor
- Siemens
- Industrial board
- HMI Touch Glass
-
HMI Full Machine Whole unit
- OMRON HMI Touch Panel
- Siemens HMI Touch Panel
- Mitsubishi HMI Touch Panel
- Allen-Bradley automation HMI Touch Panel
- DELTA HMI Touch Panel
- EVIEW DELTA HMI Touch Panel
- KINCO DELTA HMI Touch Panel
- HITECH HMI Touch Panel
- WEINTECK HMI Touch Panel
- TECVIEW HMI Touch Panel
- WEINVIEW HMI Touch Panel
- PRO-FACE HMI Touch Panel
- SIMATIC HMI Touch Panel
- AMPIRE HMI Touch Panel
- HEIDELBERG HMI Touch Panel
- PANASONIC HMI Touch Panel
- PATLITE HMI Touch Panel
- KYOCERA HMI Touch Panel
- KEYENCE HMI Touch Panel
- WEINVIEW HMI Touch Panel
- HITECH HMI Touch Panel
- FUJI HMI Touch Panel
- HAKKO HMI Touch Panel
- SCHNEIDER HMI Touch Panel
- SAMKOON touch panel
- other
- Module
- lcd inverter
- Membrane Keypad Switch
- Winni Touch Screens
- Frequency Inverter
- Servo Motor
- PLC
Name: 4PP420.1505-B5.pdf4PP420.1505-B5 B&R 15-inch industrial touch HMI equips AMT
Detailed Specifications
| Item | Official Matching Specs for 4PP420.1505-B5 Touch Glass |
|---|---|
| Matching HMI Model | B&R 4PP420.1505-B5 15” PP420 Power Panel |
| Touch Technology | Analog 4-wire resistive touch (AMT OEM standard) |
| Diagonal Size | 15 inch XGA matching viewing area |
| Controller Compatibility | Elo serial 12-bit touch controller |
| Cable Layout | Top side flat flex cable, original pinout definition |
| Surface Material | Hard anti-scratch tempered glass substrate |
| Light Transmittance | 80% ±5% industrial optical rate |
| Touch Lifespan | ≥500,000 single-point pressing cycles |
| Operating Temp | -10℃ ~ +60℃ factory workshop range |
| Storage Temp | -20℃ ~ +70℃ |
| Matching Environment | IP65 front B&R HMI, dust & light splash resistance |
| Package Content | Only touch digitizer glass (NO complete HMI, LCD, mainboard) |
| Certification | RoHS industrial spare part compliance |
Applications
Automotive assembly line B&R 4PP420.1505-B5 HMI touch layer repair
Printing & packaging machinery PP420 Power Panel touch fault replacement
CNC metal processing machine industrial operation screen touch spare parts
Textile spinning & weaving equipment 15-inch B&R HMI maintenance
Food processing factory automation control touch screen upgrade repair
Global factory obsolete B&R PP420 series touch aftermarket replacement parts
FAQ
Q1: Is this 4PP420.1505-B5 product a full B&R Power Panel HMI?
A: No, this is only standalone replacement touch digitizer glass for 4PP420.1505-B5. It does not include LCD screen, control mainboard, metal housing, power supply or communication modules, only for touch layer repair.
Q2: Can this touch glass fit other B&R PP series models like 4PP220.1505-B5?
A: Not interchangeable. The 4PP420.1505-B5 touch has unique outline size and cable position exclusive to PP420 series 4PP420.1505-B5, cannot match PP220 15-inch HMIs.
Q3: What faults can the 4PP420.1505-B5 touch glass fix?
A: It repairs original touch layer cracking, surface deep scratches, unresponsive dead touch areas, coordinate offset, broken flex cable and corroded conductive circuits on 4PP420.1505-B5 HMI.
Q4: Do extra software tools need to be installed after touch replacement?
A: No extra driver needed. After installing 4PP420.1505-B5 touch, complete native touch calibration on B&R Power Panel runtime software directly, no firmware upgrade required.
Q5: Can this touch digitizer work in high-humidity coolant workshops?
A: The touch surface has anti-corrosion coating, but the whole HMI front IP65 protection must be restored after replacement with sealing tape to prevent liquid infiltration under the touch glass.
4PP420.1505-B5 B&R 15-inch industrial touch HMI equips AMT
Detailed Specifications
| Item | Official Matching Specs for 4PP420.1505-B5 Touch Glass |
|---|---|
| Matching HMI Model | B&R 4PP420.1505-B5 15” PP420 Power Panel |
| Touch Technology | Analog 4-wire resistive touch (AMT OEM standard) |
| Diagonal Size | 15 inch XGA matching viewing area |
| Controller Compatibility | Elo serial 12-bit touch controller |
| Cable Layout | Top side flat flex cable, original pinout definition |
| Surface Material | Hard anti-scratch tempered glass substrate |
| Light Transmittance | 80% ±5% industrial optical rate |
| Touch Lifespan | ≥500,000 single-point pressing cycles |
| Operating Temp | -10℃ ~ +60℃ factory workshop range |
| Storage Temp | -20℃ ~ +70℃ |
| Matching Environment | IP65 front B&R HMI, dust & light splash resistance |
| Package Content | Only touch digitizer glass (NO complete HMI, LCD, mainboard) |
| Certification | RoHS industrial spare part compliance |
Applications
Automotive assembly line B&R 4PP420.1505-B5 HMI touch layer repair
Printing & packaging machinery PP420 Power Panel touch fault replacement
CNC metal processing machine industrial operation screen touch spare parts
Textile spinning & weaving equipment 15-inch B&R HMI maintenance
Food processing factory automation control touch screen upgrade repair
Global factory obsolete B&R PP420 series touch aftermarket replacement parts
FAQ
Q1: Is this 4PP420.1505-B5 product a full B&R Power Panel HMI?
A: No, this is only standalone replacement touch digitizer glass for 4PP420.1505-B5. It does not include LCD screen, control mainboard, metal housing, power supply or communication modules, only for touch layer repair.
Q2: Can this touch glass fit other B&R PP series models like 4PP220.1505-B5?
A: Not interchangeable. The 4PP420.1505-B5 touch has unique outline size and cable position exclusive to PP420 series 4PP420.1505-B5, cannot match PP220 15-inch HMIs.
Q3: What faults can the 4PP420.1505-B5 touch glass fix?
A: It repairs original touch layer cracking, surface deep scratches, unresponsive dead touch areas, coordinate offset, broken flex cable and corroded conductive circuits on 4PP420.1505-B5 HMI.
Q4: Do extra software tools need to be installed after touch replacement?
A: No extra driver needed. After installing 4PP420.1505-B5 touch, complete native touch calibration on B&R Power Panel runtime software directly, no firmware upgrade required.
Q5: Can this touch digitizer work in high-humidity coolant workshops?
A: The touch surface has anti-corrosion coating, but the whole HMI front IP65 protection must be restored after replacement with sealing tape to prevent liquid infiltration under the touch glass.
09/14/2026, By hugo zee
The KCG057QV1DB-G000 Kyocera TFT-LCD screen arrived well packaged and works exactly as expected. The display quality is clear and stable, and it was easy to install for my application.
Fast shipping and good communication from the seller. Very happy with this purchase and would recommend it to others.
04/20/2024, By
04/20/2024, By
04/20/2024, By
04/20/2024, By
04/20/2024, By
04/20/2024, By
04/20/2024, By
04/20/2024, By
04/20/2024, By
