5 inch TFT LCD Module P0500VGF1MBAA for Embedded Systems

The TIANMA P0500VGF1MBAA is a 5-inch a-Si TFT-LCD LCM designed for industrial display integration. It provides a 640(RGB) × 480 VGA resolution, SFT normally black transmissive display mode, a 60Hz refresh rate, and WLED backlighting. Its specified active area is 101.568(W) × 76.176(H) mm, making the module suitable for evaluation in compact industrial HMI, control, and monitoring systems.

Features

• Exact model: TIANMA P0500VGF1MBAA
• 5-inch a-Si TFT-LCD panel module
• 640(RGB) × 480 VGA resolution
• SFT normally black transmissive display mode
• 60Hz refresh rate
• WLED backlight
• Active area: 101.568(W) × 76.176(H) mm
• Specified pixel pitch: 0.0529 × 0.1587 mm
• Listed weight: 0.5, with the weight unit not specified in the provided specifications

Applications

• Industrial human-machine interfaces (HMIs)
• Machine and equipment control panels
• Process and status monitoring displays
• Embedded instrumentation interfaces
• Diagnostic and test equipment displays
• Data acquisition system interfaces

What is the display size and resolution of the TIANMA P0500VGF1MBAA?

The module has a 5-inch display area and a 640(RGB) × 480 VGA resolution.

What display technology and visual mode does the module use?

It uses a-Si TFT-LCD technology with an SFT, normally black, transmissive display mode.

What type of backlight and refresh rate are specified?

The P0500VGF1MBAA features a WLED backlight and a 60Hz refresh rate.

What are the active area and pixel pitch?

The specified active area is 101.568(W) × 76.176(H) mm, and the specified pixel pitch is 0.0529 × 0.1587 mm.

What is the listed weight of the display module?

The supplied specifications list the weight as 0.5. The measurement unit is not specified and should be confirmed before mechanical or shipment calculations.

Which details should industrial buyers verify before integration?

The provided specifications cover display size, resolution, pixel pitch, active area, display mode, refresh rate, backlight type, and weight. Signal interface, electrical requirements, operating limits, and the complete mechanical outline should be confirmed from the manufacturer before design-in.