Mitsubishi Electric AA084SC01 8.4 inch SVGA TFT-LCD Module 800x600

Product Overview

The Mitsubishi Electric AA084SC01 is an 8.4 inch SVGA (800x600) a-Si IPS, Normally Black, transmissive color TFT-LCD module in a 4:3 format without touch. It combines 85/85/85/85 wide viewing angles with 1000:1 typical contrast and 262K/16.7M colors at 72% NTSC. The edge-lit WLED backlight integrates the LED driver and supports PWM dimming at a 100,000 h typical lifetime, while a 1-channel 6/8-bit LVDS 20-pin interface standardizes board connection.

Why Choose Mitsubishi Electric Technology?

• Global industrial electronics leader: Mitsubishi Electric supplies long-established IPS display technology trusted across factory automation, medical and embedded systems.

• IPS wide viewing angles: 85/85/85/85 (CR>=10) with 1000:1 contrast keeps screens readable from multiple operator positions.

• Wide-temperature, long-life design: -30 ~ 80 C rated operation and a 100,000 h typical backlight suit demanding 24/7 deployments.

• Simplified power design: built-in LED driver with PWM dimming; standard LVDS 20-pin interface and 3.3V logic / 12V backlight inputs.

Technical Specifications

Typical Applications

• CNC and machine tool panels: 4:3 SVGA display for axis status and program control on equipment.

• Medical and diagnostic instruments: controlled-environment monitors requiring stable color and contrast.

• Rugged embedded HMI: automation consoles and operator terminals in wide-temperature cabinets.

• Test and measurement instrumentation: bench and rack displays for waveforms and parameter readouts.

• Vehicle-mounted and sheltered outdoor terminals within the -30 ~ 80 C rated range.

FAQ

Q 1: Is the AA084SC01 a Normally White or Normally Black display mode panel?
A: The AA084SC01 is an IPS, Normally Black, transmissive panel: when power is removed the screen appears dark rather than milky white. IPS gives 85/85/85/85 wide viewing angles and 1000:1 typical contrast with consistent color from every operator position. Drive polarity differs from Normally White TN modules, so configure your LVDS controller to the panel's specified data format; check the datasheet before board selection.

Q 2: How should the front surface of the AA084SC01 be cleaned and maintained?
A: This module ships without an attached touch panel; its treated industrial front cover should be cleaned only after power-off. Wipe with a soft, lint-free microfiber cloth lightly dampened with water or a mild isopropyl solution; never spray liquid directly onto the screen, and avoid solvents, abrasives, sharp objects and excessive pressure. Keep the installation area dust-free and follow the handling precautions in the manufacturer datasheet to prevent static damage.

Q 3: How is the AA084SC01 packed for export shipping and transport protection?
A: Each module is sealed in an anti-static bag, cushioned with foam and bubble wrap, and placed in a reinforced corrugated carton with corner protectors, moisture barrier and desiccant. Shipments move under cargo insurance by express air or road freight; the Hong Kong warehouse prepares export documentation and protects units against electrostatic discharge, impact and condensation during air and ocean transit.

Q 4: Is the AA084SC01 RoHS compliant and how is environmental handling documented?
A: Mitsubishi Electric industrial modules are manufactured to lead-free, RoHS-aligned standards; request the manufacturer's compliance declaration for your exact revision at order time. The module contains no user-serviceable parts and end-of-life units should be recycled through local WEEE electronics channels rather than general waste. We can supply manufacturer compliance documents for customs and procurement records.

Q 5: What ambient temperature and humidity environment does the AA084SC01 require?
A: The AA084SC01 is rated for -30 to 80 C in both operating and storage conditions, covering harsh heated cabinets and cold industrial rooms. Use it in a controlled, non-condensing environment and avoid rapid temperature swings; keep relative humidity within the non-condensing limits published in the official Mitsubishi datasheet, and protect against direct rain, chemicals and dust inside a sealed enclosure.

Q 6: Does the AA084SC01 need an external inverter, and how should the backlight be driven?
A: No external CCFL inverter is required: the WLED edge-light already has a built-in LED driver with PWM dimming. Supply backlight VL at 12.0V (10.8-13.2V) and logic VCC at 3.3V (3.0-3.6V); use the PWM signal for brightness adjustment following the datasheet timing. The backlight is unreplaceable and rated 100,000 h typical (minimum 80,000 h, brightness to 50%), so no separate high-voltage board or LED controller is needed.

Quality Assurance and Support

• ✓ Original Mitsubishi Electric Product: genuine Mitsubishi Electric module sourced through regular supply channels.

• ✓ Professional Technical Support: engineering assistance on LVDS wiring, power supply and panel integration.

• ✓ Quality Inspection: every unit is electrically and optically tested before shipment.

• ✓ Fast Shipping: dispatch from the Hong Kong warehouse with standard express couriers.

• ✓ 6-Month RMA: return merchandise authorization for confirmed manufacturing defects.

• ✓ 30-Day Returns: unused, undamaged units are eligible for return under our policy.

Packing and Shipping

Each module is sealed in an anti-static bag, protected with foam or bubble cushioning and corner protectors, and packed into a reinforced corrugated carton with moisture barrier and desiccant. Shipments are covered by cargo insurance and move by express air or road freight; the Hong Kong warehouse handles export documentation and delivers worldwide. Modules are protected against electrostatic discharge, impact and moisture during transit.