All Categories
- Industrial LCD display
-
Industrial Products
- DC Servo Drive
- AC Servo Drive
- other
- Heidelberg
- FANUC
- IFM
- Meter
- CCD
- Membrane Keypad
- Film
- YOKOGAWA Module
- Card
- ABB
- MITSUBISHI
- FANUC
- KEYENCE
- BECKHOFF
- Honeywell
- HOLLYSYS
- FUJI servo drives
- HP
- solenoid valve
- thermostat
- Siemens adapter
- color oscilloscope
- Fujitsu connector
- CHELIC
- SMC
- CISCO Module
- INTEL
- Key board
- FAIRCHILD
- Motherboard
- Board
- Bearing
- other
- Control Panel
- Contactor
- Circuit
- OMRON
- Relay
- Controller
- Photoelectric Switch
- Photoelectric Sensor
- Original
- Fan
- Motor Driver
- Limit Switch
- Amplifier
- power supply
- LENZE
- Cable
- Encoder
- Sensor
- Transformer
- Fiber Optic Sensor
- Protection Relay
- Temperature Controller
- Proximity Switch
- Switch Sensor
- Siemens
- Industrial board
- HMI Touch Glass
-
HMI Full Machine Whole unit
- OMRON HMI Touch Panel
- Siemens HMI Touch Panel
- Mitsubishi HMI Touch Panel
- Allen-Bradley automation HMI Touch Panel
- DELTA HMI Touch Panel
- EVIEW DELTA HMI Touch Panel
- KINCO DELTA HMI Touch Panel
- HITECH HMI Touch Panel
- WEINTECK HMI Touch Panel
- TECVIEW HMI Touch Panel
- WEINVIEW HMI Touch Panel
- PRO-FACE HMI Touch Panel
- SIMATIC HMI Touch Panel
- AMPIRE HMI Touch Panel
- HEIDELBERG HMI Touch Panel
- PANASONIC HMI Touch Panel
- PATLITE HMI Touch Panel
- KYOCERA HMI Touch Panel
- KEYENCE HMI Touch Panel
- WEINVIEW HMI Touch Panel
- HITECH HMI Touch Panel
- FUJI HMI Touch Panel
- HAKKO HMI Touch Panel
- SCHNEIDER HMI Touch Panel
- SAMKOON touch panel
- other
- Module
- lcd inverter
- Membrane Keypad Switch
- Winni Touch Screens
- Frequency Inverter
- Servo Motor
- PLC
Recommended Products
Home » Frequency Inverter » ABB
SDCS-PIN-3B is a power interface board for DC speed control drives, compatible with DCS800 series speed control devices. It is responsible for low-voltage power supply, armature voltage detection, armature current acquisition, excitation control, and current measurement of the entire machine.
$375.00
SDCS-PIN-3A is a DC speed regulation device power interface board, compatible with DCS400 series drivers, responsible for power signal isolation, power conversion, and trigger signal transmission, achieving signal interaction between the main control board and the power unit.
$375.00
SRFC4611C ORFC5611C inverter inlet filter protection board is used to suppress grid interference, absorb surge voltage, improve input side power quality, and protect rectifier circuits.
$50.00
RVAR-5512 is a Surge Absorber Board for frequency converters, suitable for ACS800 series high-power models, integrating varistors and RC buffer circuits.
$45.00
OINT5511C is a power drive power board for frequency converters, suitable for corresponding high-power models. It integrates power capacitors and drive trigger circuits, and is responsible for rectification power supply and IGBT drive signal output functions.
$270.00
SINT4611C is a frequency converter power drive board, compatible with ACS510 and ACS550 series 132-160kW models. Responsible for IGBT driving, power signal processing, and power supply to ensure stable operation of the inverter power unit.
$599.00
AINT-24C belongs to the ACS800 frequency converter fiber optic drive board, which combines signal driving, fiber optic communication, and detection acquisition functions, and transmits IGBT drive pulses.
$550.00
ABB 68401852 is a charging control board, also known as a protection board, suitable for high-power transmission equipment. It is equipped with 2 × 1700V diodes, rated at 3A current, and is responsible for controlling the charging circuit of the frequency converter.
$45.00
RINT-5513C is a power drive board for ACS800 frequency converter, which integrates IGBT drive, rectification and detection circuits, and is responsible for power conversion, signal sampling and fault protection functions.
$520.00
CDP312R is an operation control panel suitable for ACS800 series transmission devices, equipped with a backlit LCD display screen and function buttons, which can complete frequency converter parameter settings, operation status monitoring, start stop control, and fault code reading reset.
$55.00
RINT-5311C is a power drive board for frequency converters, suitable for 11-15kW power equipment, responsible for IGBT driving, signal triggering, and power supply functions. It can communicate with the main control board to complete power status feedback.
$168.00
SINT4430C is a frequency converter power drive board, compatible with 37KW power models, responsible for main circuit power supply and power device drive control. Onboard capacitors, power circuits, and signal detection circuits.
$499.00
AGBB-01C is a multi drive inverter interface expansion board for frequency converters, compatible with ACS800 series equipment, responsible for power unit signal distribution and signal conversion transmission.
$155.00
SINT4510C is a power drive motherboard for the ACS510 series 55kW frequency converter, suitable for three-phase 380-480V operating conditions. It integrates main circuit power supply, IGBT drive, signal sampling and protection circuits.
$558.00
NGDR-03C is a IGBT gate driver board for ACS600 frequency converter, responsible for outputting gate trigger signals and controlling the on/off switching of power devices.
$125.00
SINT4330C is a power drive board for ACS510 frequency converter, suitable for 15-22kW models, integrating power supply, IGBT trigger drive, and current sampling detection functions.
$320.00
RINT-5411C is a driver power board for ACS800 series frequency converters, suitable for 18.5kW and 22kW models, responsible for power drive, power supply, and signal acquisition and processing.
$299.00
RINT-5514C is an integrated power drive board for frequency converters. Integrated auxiliary power supply, IGBT drive, fault detection circuit, realizing signal interaction between the main control unit and power devices, with overcurrent and overvoltage protection capabilities.
$350.00
ACS550-01-290A-4 is an ABB wall mounted universal frequency converter, frame R6, three-phase 380-480V, rated output current 290A, suitable for normal load of 160kW motor, allowing 110% overload for 1 minute.
$4999.00
ACS550-01-246A-4 is an ABB ACS550 series wall mounted universal frequency converter with three-phase 380-480V input, rated power of 132kW, rated current of 246A, and protection level of IP21.
$4200.00
ACS550-01-195A-4 is an ABB wall mounted universal frequency converter, with a three-phase voltage range of 380-480V, a rated current of 195A under normal load, and suitable for 110kW motors; Under heavy load conditions, it can be equipped with a 90kW motor with IP21 protection.
$3800.00
ACS550-01-180A-4 is an ABB ACS550 series wall mounted universal frequency converter, powered by three-phase 380-480V, with a rated current of 180A, suitable for 90kW motors under light load and 75kW motors under heavy load.
$3500.00
ACS550-01-157A-4 is an ABB universal wall mounted frequency converter, with three-phase 380-480V, conventional power of 75kW, rated output current of 157A, heavy-duty conditions of 55kW and 125A, and protection level of IP21
$2750.00
ACS550-01-072A-4 is an ABB wall mounted universal frequency converter with a R4 frame, three-phase 380-480V. It has a rated output current of 72A under normal load and is compatible with a 37kW motor; Heavy load condition 59A, suitable for 30kW motor, with protection of IP21.
$2300.00
