Kyocera KCG075VG2BH-G00 7.5 inch 640x480 CSTN LCD Display

Product Overview

The Kyocera KCG075VG2BH-G00 is a 7.5 inch color CSTN (Color Super-Twisted Nematic) LCD module with 640(RGB)x480 VGA resolution in a 4:3 format. Built on a normally-black transmissive STN cell with RGB vertical stripe, it carries a CCFL backlight and ships as a standard bare panel without a touch sensor. As part of the Kyocera KCG075VG2BH family, it targets replacement and retrofit jobs on legacy industrial HMI consoles, machine panels and instrument displays. Several optical, electrical and mechanical parameters are not published on accessible sources; always verify those against the physical panel label or the official Kyocera datasheet before design-in.

Why Choose Kyocera Technology?

• Original Kyocera module: the KCG prefix identifies this panel as a Kyocera CSTN product, not a KOE or generic replacement, and units are checked against factory labeling before dispatch.

• Proven legacy VGA format: 640x480 on a 4:3 cell matches older industrial controllers, panel meters and HMI software that were written for VGA rather than wide-screen ratios.

• CCFL-lit transmissive cell: the normally-black transmissive STN layer delivers a steady color image for indoor control panels under conventional workshop lighting.

• No-touch standard build: the bare panel leaves the choice of touch film, bezel and mounting bracket to the integrator, avoiding unnecessary touch cost on retrofit projects.

• Honest specification handling: parameters not publicly published are marked as such instead of being estimated from sibling models, so buyers can plan with verified facts.

Technical Specifications

Typical Applications

• Legacy industrial HMI retrofit: replacement VGA screens on older operator consoles and machine control panels.

• Panel meters and instrumentation: readout panels on test benches, analyzers and field measurement instruments.

• PLC and embedded controller displays: status menus and parameter screens on older automation hardware kept in service.

• Medical and bench equipment spare screens: replacement panels on diagnostics units kept running beyond their original launch cycle.

• Training and simulator consoles: fixed indoor control panels where VGA-format CSTN graphics are sufficient.

FAQ

Q: What is the screen size and resolution of the KCG075VG2BH-G00?

A: The KCG075VG2BH-G00 is a 7.5 inch color CSTN-LCD module with 640(RGB)x480 VGA resolution on a 4:3 aspect ratio, with an active area of 151.68 (W) x 113.76 (H) mm. It is a VGA-format panel designed to match older controllers that output 640x480; outline dimensions, pixel pitch and mechanical cut-out values are not published and must be checked on the unit label or the Kyocera datasheet before machining an enclosure.

Q: Which backlight type does the KCG075VG2BH-G00 use?

A: The panel uses a CCFL (cold cathode fluorescent lamp) backlight, the conventional edge-lit fluorescent light source of this legacy Kyocera CSTN generation. The rated backlight lifetime in hours is not publicly published for this exact suffix, so do not estimate it from sibling panels; confirm the figure on the physical label or the Kyocera datasheet, and plan a compatible CCFL inverter in your host design.

Q: What operating temperature range is the KCG075VG2BH-G00 rated for?

A: The confirmed operating range is 0 to 60 C, with a storage range of -20 to 60 C. This suits indoor workshop panels and climate-controlled cabinets; it is not a wide-temperature outdoor or freezer-rated panel. Running or storing the unit outside these limits can slow STN response and shorten backlight life, so verify the label rating on your received unit before installation in non-standard environments.

Q: What is the lead time for ordering the KCG075VG2BH-G00?

A: Lead time: 3-5 business days for in-stock units after order confirmation and payment processing. Orders are dispatched from our Hong Kong warehouse with tracking provided after shipment; for bulk quantities or mixed panel lists, contact our sales team for a consolidated quote and a confirmed stock position before committing to a production schedule.

Q: How are quality problems with the KCG075VG2BH-G00 handled after delivery?

A: If the panel arrives defective or fails within the RMA window, take clear photos and a short video showing the fault (no display, lines, dark band, CCFL not lit) and send them with your order number. After confirmation we offer an exchange unit or a return with refund, according to the agreed solution. Transit damage must be reported on arrival; each panel is visually and functionally inspected before dispatch, and the 6-month RMA plus 30-day return policy cover confirmed manufacturing defects.

Quality Assurance and Support

• ✓ Original Kyocera Product: genuine Kyocera KCG-series module sourced from authorized supply channels

• ✓ Professional Technical Support: assistance with interface matching, CCFL inverter selection and replacement compatibility checks

• ✓ Quality Inspection: each panel undergoes visual and functional testing before shipment

• ✓ Fast Shipping: Lead time: 3-5 business days, dispatched from our Hong Kong warehouse

• ✓ 6-Month RMA: return merchandise authorization support for confirmed manufacturing defects

• ✓ 30-Day Returns: unused, resalable units may be returned under the stated policy

Packing and Shipping

Each KCG075VG2BH-G00 module is wrapped in an anti-static shielding bag, cushioned with foam or bubble protection inside a dedicated carton, and secured against flexing during transit. CCFL tubes and the STN glass are fragile, so the carton is marked for careful handling. Shipments leave our Hong Kong warehouse with tracking provided after dispatch; please inspect the panel immediately on arrival and report any transport damage within the allowed window. Bulk orders are packed to prevent stack compression, and we advise keeping the anti-static bag until installation.