All Categories
- Industrial LCD display
-
Industrial Products
- DC Servo Drive
- AC Servo Drive
- other
- Heidelberg
- FANUC
- IFM
- Meter
- CCD
- Membrane Keypad
- Film
- YOKOGAWA Module
- Card
- ABB
- MITSUBISHI
- FANUC
- KEYENCE
- BECKHOFF
- Honeywell
- HOLLYSYS
- FUJI servo drives
- HP
- solenoid valve
- thermostat
- Siemens adapter
- color oscilloscope
- Fujitsu connector
- CHELIC
- SMC
- CISCO Module
- INTEL
- Key board
- FAIRCHILD
- Motherboard
- Board
- Bearing
- other
- Control Panel
- Contactor
- Circuit
- OMRON
- Relay
- Controller
- Photoelectric Switch
- Photoelectric Sensor
- Original
- Fan
- Motor Driver
- Limit Switch
- Amplifier
- power supply
- LENZE
- Cable
- Encoder
- Sensor
- Transformer
- Fiber Optic Sensor
- Protection Relay
- Temperature Controller
- Proximity Switch
- Switch Sensor
- Siemens
- Industrial board
- HMI Touch Glass
-
HMI Full Machine Whole unit
- OMRON HMI Touch Panel
- Siemens HMI Touch Panel
- Mitsubishi HMI Touch Panel
- Allen-Bradley automation HMI Touch Panel
- DELTA HMI Touch Panel
- EVIEW DELTA HMI Touch Panel
- KINCO DELTA HMI Touch Panel
- HITECH HMI Touch Panel
- WEINTECK HMI Touch Panel
- TECVIEW HMI Touch Panel
- WEINVIEW HMI Touch Panel
- PRO-FACE HMI Touch Panel
- SIMATIC HMI Touch Panel
- AMPIRE HMI Touch Panel
- HEIDELBERG HMI Touch Panel
- PANASONIC HMI Touch Panel
- PATLITE HMI Touch Panel
- KYOCERA HMI Touch Panel
- KEYENCE HMI Touch Panel
- WEINVIEW HMI Touch Panel
- HITECH HMI Touch Panel
- FUJI HMI Touch Panel
- HAKKO HMI Touch Panel
- SCHNEIDER HMI Touch Panel
- SAMKOON touch panel
- other
- Module
- lcd inverter
- Membrane Keypad Switch
- Winni Touch Screens
- Frequency Inverter
- Servo Motor
- PLC
Recommended Products
Home » Frequency Inverter » OMRON
G9SE-201 is a compact safety relay unit that provides 24VDC power and supports single/dual channel safety inputs. It is equipped with two instantaneous safety normally open outputs and one solid-state auxiliary output.
$88.00
Omron C200H-TC002 temperature control unit for C200H PLCs. 2-loop PID temperature control with thermocouple/RTD inputs, relay or linear current outputs, new original package for process and factory automation.
$110.00
B7A-T6C1 is a 16-point input terminal module that adopts PNP compatible input logic and supports 12V to 24V operating power supply.Support 2-wire or 3-wire VCTF cable transmission, and the transmission distance can reach 500m in standard mode.
$345.00
GRT1-AD2 is an analog input module launched by Omron. It provides a 2-point analog input channel, supports current or voltage signal input, adapts to PNP type input, and adopts 3-wire terminal blocks.
$345.00
GRT1-TS2P is a 2-channel Pt100 thermistor temperature measurement module from Omron SmartSlice series, with a temperature measurement range of -200~850 ℃ and high measurement accuracy. It is compatible with CompoNet bus distributed IO systems.
$405.00
GRT1-DA2C is a 2-channel current type analog output module from Omron SmartSlice series, supporting 0-20mA and 4-20mA standard signals, with a resolution of 1/6000 and an overall accuracy of ± 0.4% FS.
$500.00
GRT1-OD4-1 is a 4-point PNP digital output module of Omron GRT1 series, which supports 24V DC voltage and 500mA output current. It adopts a compact design and is compatible with DIN rail and screw installation.
$750.00
GRT1-OD4-1 is a 4-point PNP digital output module of Omron GRT1 series, which supports 24V DC voltage and 500mA output current. It adopts a compact design and is compatible with DIN rail and screw installation.
$170.00
GRT1-ID4-1 is a 4-point PNP digital input module of Omron GRT1 series, which supports DeviceNet/Component communication, has a compact design, and is compatible with DIN rail and screw installation.
$175.00
E5EN-R3MT-500-N is a 48 × 96mm universal digital temperature controller, powered by 100-240VAC, relay controlled output, and supports thermocouple and platinum resistance universal input.
$250.00
NJ501-1300 is an integrated machine automation controller that integrates logic and motion control. It supports up to 16 axis synchronous motion and is equipped with 20MB of program memory. It has a built-in EtherCAT master station and EtherNet/IP interface.
$1700.00
NJ301-1100 is a machine automation controller CPU unit that supports 4-axis synchronous motion control, with a total of 15 axes and a basic task cycle of 0.5ms. It is equipped with 5MB program memory and 2.5MB variable memory.
$850.00
FH-L550 is an Omron box type visual controller that supports up to 2 cameras, equipped with 4GB RAM and 4GB ROM, no built-in fan, and operates in a wide temperature range of 0-55 ℃.
$1250.00
3G3MX2-A4040-V2 is the Omron MX2-V2 series three-phase 400V frequency converter Control Module, which is compatible with 4kW motors and supports sensorless vector control of induction and permanent magnet motors.
$380.00
3G3AX-MX2-ECT is an EtherCAT communication module compatible with MX2 series frequency converters. It does not require an external power supply and is powered by the frequency converter. It is equipped with dual RJ45 interfaces and supports daisy chain networking.
$200.00
CJ1W-TER01 is a terminal cover plate for the CJ series PLC rack, installed at the far right end of the CPU rack, and is a necessary accessory. Missing it will trigger a fatal fault error in the PLC.
$40.00
E3Z-LR86 is a retro reflective laser photoelectric sensor that uses a Class 1 red laser light source, with a detection distance of up to 15 meters. It has an M8 four pin connector, PNP output, and supports switching between light in/light blocking modes.
$47.00
E3Z-B81 is a retro reflective photoelectric sensor with PNP output, compatible with 12-24VDC power supply, designed specifically for transparent object detection, with a detection distance of 100-500mm.
$32.00
E3C-LD11 is a laser type photoelectric sensor detection head with diffuse reflection detection method, equipped with a 650nm visible laser light source, and a maximum detection distance of up to 1000mm.
$187.00
E2E-X7D1 M1GJ is an M18 shielded inductive proximity sensor with a detection distance of 7mm. It has a DC two-wire normally open output and is equipped with an M12 connector.
$25.00
D4NL-1CFG-B is an electromagnetic locking safety door switch from Omron that supports DC24V solenoid locking and mechanical release. It is equipped with a slow-acting forced disconnection of NC contacts and provides a 2NC+2NC contact structure.
$85.00
H5CX-A-N is a 48 × 48mm panel mounted digital timer with a power supply of AC100-240V, screw terminal wiring, single group contact output, 4-digit high-definition LCD display, and a time range of 0.001-9999h.
$82.00
TL-W5MC1 is a square inductive proximity sensor with a DC three wire NPN normally open output, a detection distance of 5mm, and a power supply of 10-30VDC.
$14.00
R88D-KP04H is a G5 series pulse input AC servo driver with a rated power of 400W, compatible with a 200V single-phase power supply, and a speed response of up to 2kHz. Equipped with self-tuning, vibration suppression control, and gain switching functions.
$308.00
