KHS038AAIAA-B70 KYOCERA 3.8-inch LCD screen display panel
- Industrial LCD display
-
Industrial Products
- DC Servo Drive
- AC Servo Drive
- other
- Heidelberg
- FANUC
- IFM
- Meter
- CCD
- Membrane Keypad
- Film
- YOKOGAWA Module
- Card
- ABB
- MITSUBISHI
- FANUC
- KEYENCE
- BECKHOFF
- Honeywell
- HOLLYSYS
- FUJI servo drives
- HP
- solenoid valve
- thermostat
- Siemens adapter
- color oscilloscope
- Fujitsu connector
- CHELIC
- SMC
- CISCO Module
- INTEL
- Key board
- FAIRCHILD
- Motherboard
- Board
- Bearing
- other
- Control Panel
- Contactor
- Circuit
- OMRON
- Relay
- Controller
- Photoelectric Switch
- Photoelectric Sensor
- Original
- Fan
- Motor Driver
- Limit Switch
- Amplifier
- power supply
- LENZE
- Cable
- Encoder
- Sensor
- Transformer
- Fiber Optic Sensor
- Protection Relay
- Temperature Controller
- Proximity Switch
- Switch Sensor
- Siemens
- Industrial board
- HMI Touch Glass
-
HMI Full Machine Whole unit
- OMRON HMI Touch Panel
- Siemens HMI Touch Panel
- Mitsubishi HMI Touch Panel
- Allen-Bradley automation HMI Touch Panel
- DELTA HMI Touch Panel
- EVIEW DELTA HMI Touch Panel
- KINCO DELTA HMI Touch Panel
- HITECH HMI Touch Panel
- WEINTECK HMI Touch Panel
- TECVIEW HMI Touch Panel
- WEINVIEW HMI Touch Panel
- PRO-FACE HMI Touch Panel
- SIMATIC HMI Touch Panel
- AMPIRE HMI Touch Panel
- HEIDELBERG HMI Touch Panel
- PANASONIC HMI Touch Panel
- PATLITE HMI Touch Panel
- KYOCERA HMI Touch Panel
- KEYENCE HMI Touch Panel
- WEINVIEW HMI Touch Panel
- HITECH HMI Touch Panel
- FUJI HMI Touch Panel
- HAKKO HMI Touch Panel
- SCHNEIDER HMI Touch Panel
- SAMKOON touch panel
- other
- Module
- lcd inverter
- Membrane Keypad Switch
- Winni Touch Screens
- Frequency Inverter
- Servo Motor
- PLC
Name: KHS038AAIAA-B70.pdfKHS038AAIAA-B70 KYOCERA 3.8-inch LCD screen display panel
Detailed Specifications
| Parameter Item | Exact Technical Index |
|---|---|
| Full Model Number | KHS038AAIAA-B70 |
| Manufacturer | Kyocera Corporation (Japan) |
| Diagonal Screen Size | 3.8 inch |
| Native Resolution | 320(RGB) × 240 QVGA Color |
| Display Technology | Industrial Transmissive CSTN Color LCD, Normally White |
| Typical Brightness | 160 cd/m² |
| Typical Contrast Ratio | 36:1 |
| Viewing Angle (L/R / U/D, CR≥2) | 40° / 40° ; 22° / 22° |
| Response Time (Tr / Td Typ.) | 270ms / 145ms |
| Backlight Configuration | Single replaceable CCFL lamp, rated 34,000-hour service life |
| Signal Interface | 14-pin 8-bit parallel RGB data interface |
| Supply Input Voltage | DC 5.0V (Standard) |
| Refresh Operating Frequency | 68Hz |
| Active Display Area | 76.8mm (W) × 57.6mm (H) |
| Overall Outline Dimension | 102.4mm (W) × 79.5mm (H) × 8.2mm (D) |
| Surface Treatment | Flat matte anti-glare front glass surface |
| Operating Ambient Temp | 0 ℃ ~ +55 ℃ (Non-condensing) |
| Storage Temperature Range | -20 ℃ ~ +68 ℃ |
| Relative Humidity | 10 % ~ 90 % RH (No condensation) |
| Protection Class | IP20 (Indoor compact equipment housing installation only) |
| Compatible Host Equipment | Vintage portable industrial testers, handheld medical diagnostic devices, mini textile machine control HMIs, small injection molding auxiliary panels |
| Production Status | Officially discontinued, only genuine original new spare inventory available |
| Certifications | CE, RoHS Compliant |
Applications
Handheld Portable Industrial Test Equipment: Portable thickness testers, field electrical parameter measuring instruments, handheld metal detection devices
Mini Textile Processing Automation Equipment: Compact yarn winding machine control terminals, small fabric cutting machine parameter display panels
Vintage Mini Industrial HMI Panels: Small injection molding auxiliary control HMIs, bench-top packaging machine monitoring displays
Portable Medical Diagnostic Instruments: Handheld ECG, blood glucose and blood pressure recording terminals
Legacy Equipment Retrofit & Maintenance: Direct drop-in replacement of aged original 3.8-inch Kyocera mini color LCD screens on existing portable tester and miniature factory automation control systems
FAQ
Q1: Is KHS038AAIAA-B70 still mass-produced by Kyocera?
A: The KHS038AAIAA-B70 mini CSTN color LCD model has been officially discontinued by Kyocera Corporation. No new mass production orders can be placed; product supply is limited to remaining genuine original new spare inventory only.
Q2: Can KHS038AAIAA-B70 be directly replaced with KHS038AAIAA-B60?
A: They share identical mechanical outline size and 14-pin parallel interface, but have minor differences in optical parameters and backlight matching; please confirm host inverter specifications before purchasing.
Q3: Does KHS038AAIAA-B70 require a dedicated CCFL inverter board?
A: Yes, this module uses single CCFL backlight, must be matched with the original supporting CCFL drive inverter from the host portable tester or mini machine HMI panel.
Q4: Is stocked KHS038AAIAA-B70 brand-new original Kyocera LCD panel?
A: All in-stock KHS038AAIAA-B70 are brand-new original A-grade Kyocera display modules, no second-hand or refurbished screens. Every panel undergoes full brightness, pixel integrity and signal timing testing before delivery with official factory inspection report attached.
Q5: Can KHS038AAIAA-B70 run continuously in dusty open workshop environments?
A: It is recommended to install a sealed front protective cover for long-term use. Long-term heavy dust accumulation will reduce backlight brightness service life and may introduce electromagnetic signal interference faults.
KHS038AAIAA-B70 KYOCERA 3.8-inch LCD screen display panel
Detailed Specifications
| Parameter Item | Exact Technical Index |
|---|---|
| Full Model Number | KHS038AAIAA-B70 |
| Manufacturer | Kyocera Corporation (Japan) |
| Diagonal Screen Size | 3.8 inch |
| Native Resolution | 320(RGB) × 240 QVGA Color |
| Display Technology | Industrial Transmissive CSTN Color LCD, Normally White |
| Typical Brightness | 160 cd/m² |
| Typical Contrast Ratio | 36:1 |
| Viewing Angle (L/R / U/D, CR≥2) | 40° / 40° ; 22° / 22° |
| Response Time (Tr / Td Typ.) | 270ms / 145ms |
| Backlight Configuration | Single replaceable CCFL lamp, rated 34,000-hour service life |
| Signal Interface | 14-pin 8-bit parallel RGB data interface |
| Supply Input Voltage | DC 5.0V (Standard) |
| Refresh Operating Frequency | 68Hz |
| Active Display Area | 76.8mm (W) × 57.6mm (H) |
| Overall Outline Dimension | 102.4mm (W) × 79.5mm (H) × 8.2mm (D) |
| Surface Treatment | Flat matte anti-glare front glass surface |
| Operating Ambient Temp | 0 ℃ ~ +55 ℃ (Non-condensing) |
| Storage Temperature Range | -20 ℃ ~ +68 ℃ |
| Relative Humidity | 10 % ~ 90 % RH (No condensation) |
| Protection Class | IP20 (Indoor compact equipment housing installation only) |
| Compatible Host Equipment | Vintage portable industrial testers, handheld medical diagnostic devices, mini textile machine control HMIs, small injection molding auxiliary panels |
| Production Status | Officially discontinued, only genuine original new spare inventory available |
| Certifications | CE, RoHS Compliant |
Applications
Handheld Portable Industrial Test Equipment: Portable thickness testers, field electrical parameter measuring instruments, handheld metal detection devices
Mini Textile Processing Automation Equipment: Compact yarn winding machine control terminals, small fabric cutting machine parameter display panels
Vintage Mini Industrial HMI Panels: Small injection molding auxiliary control HMIs, bench-top packaging machine monitoring displays
Portable Medical Diagnostic Instruments: Handheld ECG, blood glucose and blood pressure recording terminals
Legacy Equipment Retrofit & Maintenance: Direct drop-in replacement of aged original 3.8-inch Kyocera mini color LCD screens on existing portable tester and miniature factory automation control systems
FAQ
Q1: Is KHS038AAIAA-B70 still mass-produced by Kyocera?
A: The KHS038AAIAA-B70 mini CSTN color LCD model has been officially discontinued by Kyocera Corporation. No new mass production orders can be placed; product supply is limited to remaining genuine original new spare inventory only.
Q2: Can KHS038AAIAA-B70 be directly replaced with KHS038AAIAA-B60?
A: They share identical mechanical outline size and 14-pin parallel interface, but have minor differences in optical parameters and backlight matching; please confirm host inverter specifications before purchasing.
Q3: Does KHS038AAIAA-B70 require a dedicated CCFL inverter board?
A: Yes, this module uses single CCFL backlight, must be matched with the original supporting CCFL drive inverter from the host portable tester or mini machine HMI panel.
Q4: Is stocked KHS038AAIAA-B70 brand-new original Kyocera LCD panel?
A: All in-stock KHS038AAIAA-B70 are brand-new original A-grade Kyocera display modules, no second-hand or refurbished screens. Every panel undergoes full brightness, pixel integrity and signal timing testing before delivery with official factory inspection report attached.
Q5: Can KHS038AAIAA-B70 run continuously in dusty open workshop environments?
A: It is recommended to install a sealed front protective cover for long-term use. Long-term heavy dust accumulation will reduce backlight brightness service life and may introduce electromagnetic signal interference faults.
04/20/2024, By
04/20/2024, By
04/20/2024, By
04/20/2024, By
04/20/2024, By
04/20/2024, By
04/20/2024, By
04/20/2024, By
04/20/2024, By
04/20/2024, By
