NL6448BC20-08E NEC 6.5 inch 640*480 TFT LCD Screen
- Industrial LCD display
-
Industrial Products
- DC Servo Drive
- AC Servo Drive
- other
- Heidelberg
- FANUC
- IFM
- Meter
- CCD
- Membrane Keypad
- Film
- YOKOGAWA Module
- Card
- ABB
- MITSUBISHI
- FANUC
- KEYENCE
- BECKHOFF
- Honeywell
- HOLLYSYS
- FUJI servo drives
- HP
- solenoid valve
- thermostat
- Siemens adapter
- color oscilloscope
- Fujitsu connector
- CHELIC
- SMC
- CISCO Module
- INTEL
- Key board
- FAIRCHILD
- Motherboard
- Board
- Bearing
- other
- Control Panel
- Contactor
- Circuit
- OMRON
- Relay
- Controller
- Photoelectric Switch
- Photoelectric Sensor
- Original
- Fan
- Motor Driver
- Limit Switch
- Amplifier
- power supply
- LENZE
- Cable
- Encoder
- Sensor
- Transformer
- Fiber Optic Sensor
- Protection Relay
- Temperature Controller
- Proximity Switch
- Switch Sensor
- Siemens
- Industrial board
- HMI Touch Glass
-
HMI Full Machine Whole unit
- OMRON HMI Touch Panel
- Siemens HMI Touch Panel
- Mitsubishi HMI Touch Panel
- Allen-Bradley automation HMI Touch Panel
- DELTA HMI Touch Panel
- EVIEW DELTA HMI Touch Panel
- KINCO DELTA HMI Touch Panel
- HITECH HMI Touch Panel
- WEINTECK HMI Touch Panel
- TECVIEW HMI Touch Panel
- WEINVIEW HMI Touch Panel
- PRO-FACE HMI Touch Panel
- SIMATIC HMI Touch Panel
- AMPIRE HMI Touch Panel
- HEIDELBERG HMI Touch Panel
- PANASONIC HMI Touch Panel
- PATLITE HMI Touch Panel
- KYOCERA HMI Touch Panel
- KEYENCE HMI Touch Panel
- WEINVIEW HMI Touch Panel
- HITECH HMI Touch Panel
- FUJI HMI Touch Panel
- HAKKO HMI Touch Panel
- SCHNEIDER HMI Touch Panel
- SAMKOON touch panel
- other
- Module
- lcd inverter
- Membrane Keypad Switch
- Winni Touch Screens
- Frequency Inverter
- Servo Motor
- PLC
Name: NL6448BC20-08E.pdfNL6448BC200-8E 6.5 inch 640*480 LCD Screen
Product Overview
Our tested NL6448BC20-08E modules support 24‑hour continuous operation with uniform brightness and consistent color performance. Actual installation shows perfect mechanical matching with standard mounting holes, simplifying replacement and upgrade. Real customer applications include industrial HMI panels, measurement equipment, and on‑site monitoring displays, where NL6448BC20-08E maintains stable output under temperature variations and vibration conditions.
NL6448BC20-08E uses a 6‑bit parallel RGB interface (31‑pin connector) and supports 262K colors (42% NTSC). Typical brightness reaches 300 cd/m², contrast ratio 250:1, and viewing angle 50/50/35/45 (L/R/U/D, CR≥10) to ensure clear vision from multiple directions. The built‑in dual CCFL backlight is replaceable for extended service life; brightness adjustment and reverse scan functions enhance flexibility in system design. With an operating temperature range of 0–60°C and vibration resistance up to 2.0G, NL6448BC20-08E meets tough industrial environmental requirements.
NL6448BC20-08E Product Specifications Table
| Model: | NL6448BC20-08E | Panel Type: | a-Si TFT-LCD, LCM |
| Size: | 6.5" | Power Supply: | 3.3/5.0V (Typ.)(VCC) |
| Pixel Number: | 640(RGB)×480, 4:3, VGA | Frame Rate: | 60Hz |
| Active Area: | 132.48(H)×99.36(V) mm | Contrast Ratio: | 250:1 (Typ.) (TM) |
| Luminance: | 300 cd/m² (Typ.) | Operating Mode: | TN, Normally White, Transmissive |
| Viewing Angle: | 50/50/35/45 (Typ.)(CR≥10) | Response Time: | 13/36 (Typ.)(Tr/Td) mm |
| Support Color: | 262K, 42% NTSC | Light Source: | 2 pcs CCFL, Without Driver |
| Interface: | CMOS (1 ch, 6-bit), 31 pins Connector | Operating Temp: | 0 ~ 60 °C |
Image Display
FAQ
Q1: Is NL6448BC20-08E compatible with my existing HMI?
A: Yes. NL6448BC20-08E uses standard 640×480 VGA timing and 31‑pin parallel RGB; mechanical dimensions match most legacy 6.5‑inch industrial panels. Confirm pin definition before replacement.
Q2: Does NL6448BC20-08E include a backlight driver?
A: No. It has dual CCFL tubes but no inverter/driver. Use recommended matching driver for proper operation.
Q3: Can I use NL6448BC20-08E outdoors?
A: It is designed for indoor/covered industrial environments. Outdoor use requires additional sunshade and brightness enhancement.
Q4: What is the backlight service life?
A: Typical 30,000+ hours; lamps are replaceable to extend module life.
Q5: Where can I get the official datasheet?
A: We provide the complete NEC datasheet for NL6448BC20-08E including mechanical drawings, electrical parameters, and pinouts upon request.
Product Applications
NL6448BC20-08E is widely used in:
Industrial control systems & HMI terminals
Measuring instruments & analytical equipment
Process monitoring displays
Embedded industrial computers
Factory automation terminals
Medical & automotive onboard displays (non‑critical)
NL6448BC200-8E 6.5 inch 640*480 LCD Screen
Product Overview
Our tested NL6448BC20-08E modules support 24‑hour continuous operation with uniform brightness and consistent color performance. Actual installation shows perfect mechanical matching with standard mounting holes, simplifying replacement and upgrade. Real customer applications include industrial HMI panels, measurement equipment, and on‑site monitoring displays, where NL6448BC20-08E maintains stable output under temperature variations and vibration conditions.
NL6448BC20-08E uses a 6‑bit parallel RGB interface (31‑pin connector) and supports 262K colors (42% NTSC). Typical brightness reaches 300 cd/m², contrast ratio 250:1, and viewing angle 50/50/35/45 (L/R/U/D, CR≥10) to ensure clear vision from multiple directions. The built‑in dual CCFL backlight is replaceable for extended service life; brightness adjustment and reverse scan functions enhance flexibility in system design. With an operating temperature range of 0–60°C and vibration resistance up to 2.0G, NL6448BC20-08E meets tough industrial environmental requirements.
NL6448BC20-08E Product Specifications Table
| Model: | NL6448BC20-08E | Panel Type: | a-Si TFT-LCD, LCM |
| Size: | 6.5" | Power Supply: | 3.3/5.0V (Typ.)(VCC) |
| Pixel Number: | 640(RGB)×480, 4:3, VGA | Frame Rate: | 60Hz |
| Active Area: | 132.48(H)×99.36(V) mm | Contrast Ratio: | 250:1 (Typ.) (TM) |
| Luminance: | 300 cd/m² (Typ.) | Operating Mode: | TN, Normally White, Transmissive |
| Viewing Angle: | 50/50/35/45 (Typ.)(CR≥10) | Response Time: | 13/36 (Typ.)(Tr/Td) mm |
| Support Color: | 262K, 42% NTSC | Light Source: | 2 pcs CCFL, Without Driver |
| Interface: | CMOS (1 ch, 6-bit), 31 pins Connector | Operating Temp: | 0 ~ 60 °C |
Image Display
FAQ
Q1: Is NL6448BC20-08E compatible with my existing HMI?
A: Yes. NL6448BC20-08E uses standard 640×480 VGA timing and 31‑pin parallel RGB; mechanical dimensions match most legacy 6.5‑inch industrial panels. Confirm pin definition before replacement.
Q2: Does NL6448BC20-08E include a backlight driver?
A: No. It has dual CCFL tubes but no inverter/driver. Use recommended matching driver for proper operation.
Q3: Can I use NL6448BC20-08E outdoors?
A: It is designed for indoor/covered industrial environments. Outdoor use requires additional sunshade and brightness enhancement.
Q4: What is the backlight service life?
A: Typical 30,000+ hours; lamps are replaceable to extend module life.
Q5: Where can I get the official datasheet?
A: We provide the complete NEC datasheet for NL6448BC20-08E including mechanical drawings, electrical parameters, and pinouts upon request.
Product Applications
NL6448BC20-08E is widely used in:
Industrial control systems & HMI terminals
Measuring instruments & analytical equipment
Process monitoring displays
Embedded industrial computers
Factory automation terminals
Medical & automotive onboard displays (non‑critical)
04/20/2024, By
04/20/2024, By
04/20/2024, By
04/20/2024, By
04/20/2024, By
04/20/2024, By
04/20/2024, By
04/20/2024, By
04/20/2024, By
04/20/2024, By
