Toshiba 6.5-inch LCD display EDTCA41QDF

Key Features

• High Peak Output Current: (e.g., ±4A Source/Sink typical for such a package)

• Wide Supply Voltage Range: (e.g., 10V to 20V for the secondary side)

• High-Speed Switching: (e.g.,<50ns propagation delay)

• Independent Source and Sink Outputs: Allows for separate optimization of turn-on and turn-off speed.

• Under-Voltage Lockout (UVLO): Protects the power switch by disabling the driver if the supply voltage is too low.

• Matched Propagation Delays: Between channels for parallel operation.

• High Common-Mode Transient Immunity (CMTI): >50 kV/µs (typical for robust operation in bridge circuits).

• Package: High-voltage isolated package (e.g., SO-16W or similar wide-body).

Detailed Specifications (Inferred)

Pin Configuration (Typical for a Half-Bridge Driver in SO-16W)
*(This is a common configuration for drivers like the IR2110/IRS2110, which EDTCA14QEF is likely similar to)*

• Pin 1 (VCC): Logic supply voltage

• Pin 2 (HIN): High-side logic input

• Pin 3 (LIN): Low-side logic input

• Pin 4 (COM): Low-side ground / Logic ground

• Pin 5 (LO): Low-side gate driver output

• Pin 6 (VS): High-side floating supply return

• Pin 7 (HO): High-side gate driver output

• Pin 8 (VB): High-side floating supply

• *(Pins 9-16):** May be No Connect (NC), Ground, or provide additional functionality.

Absolute Maximum Ratings

• High-Side Floating Supply Voltage (VB): VS + 20V

• High-Side Floating Supply Offset Voltage (VS): 500V (or higher, depending on the part)

• Logic Input Voltage (VIN): -0.3V to VCC + 0.3V

• Operating Junction Temperature: -55°C to +150°C

• Storage Temperature: -55°C to +150°C